Kit Contents
The Apogee Peregrine kit includes all components needed for a complete dual-deployment rocket build.
Kit Identification
| Info |
Value |
| Kit Number |
04998 |
| Face Card P/N |
39101 |
| Barcode |
656779049988 |
| Age Rating |
18+ |
Packaging vs Website Discrepancies
| Item |
Packaging |
Website/Actual |
| Skill Level |
4 |
3 |
| Height |
"Over 65"" |
68.8" (175 cm) |
Airframe Components
| Component |
Description |
| Body Tubes |
Heavy-wall kraft paper, white overwrap |
| Coupler Tubes |
For joining sections |
| Nose Cone (PNC-98) |
5:1 ogive, polypropylene plastic |
| Centering Rings |
Aviation plywood |
| Bulkheads |
Plywood |
Fin Assembly
| Component |
Description |
| Fins (3) |
Laser-cut birch plywood, swept-back curved shape |
| Fin Alignment |
Interlocking support structure |
Motor Mount
| Component |
Description |
| Motor Tube |
38mm diameter, heavy wall |
| Centering Rings |
Plywood, sized for 38mm to 98mm |
| Thrust Block |
Included (remove for longer motors) |
Motor Retention
Motor retention is NOT included. Apogee recommends:
- AeroPack 38L Engine Retainer
- Fins & Fire 38mm Retainer
- Or use masking tape (traditional method)
Electronics Bay (E-Bay)
| Component |
Description |
| E-Bay Tube |
98mm diameter coupler |
| Bulkheads |
Plywood with eyebolt holes |
| Sled |
Plywood mounting platform |
| Threaded Rod |
Single rod design (lighter than dual-rod) |
| Switch Band |
For arming switch mounting |
| Hardware |
Wing nut, washers, eyebolts |
Recovery System
| Component |
Size/Description |
| Main Parachute |
48" ripstop nylon, printed pattern |
| Drogue Parachute |
18" ripstop nylon |
| Shock Cord (Main) |
Shorter cord, fluorescent orange tubular nylon |
| Shock Cord (Drogue) |
Longer cord, fluorescent orange tubular nylon |
| Chute Protectors |
12" Nomex, reusable (2 included) |
| Quick Links |
For easy parachute attachment |
Finishing
| Component |
Description |
| Vinyl Decals |
2 full sheets (color + metallic silver) |
| Rail Buttons |
For launch rail guidance |
| Plastic Rivets |
For securing e-bay to airframe |
Not Included (Required)
- Motor retention system
- Altimeter/flight computer
- Ejection charge canisters (for dual deploy)
- Black powder or CO2 cartridges
- E-matches or igniters
- Epoxy (5-minute and 30-minute recommended)
- Paint and primer
- Motors
Optional Accessories
- 29/38mm Motor Adapter (for test flights on G motors)
- AeroPack Motor Retainer
- GPS Tracker
- Keychain camera with aerodynamic shroud